ros666/drivers/block/sdcard.rs
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808
//! ## SDCard Driver
//!
//! ## References:
//!
//! Copied from [rCore-Tutorial-v3/os/src/drivers/block/sdcard.rs](https://github.com/rcore-os/rCore-Tutorial-v3/blob/ch6-dbg/os/src/drivers/block/sdcard.rs)
//! - Author: [wyfcyx](https://github.com/wyfcyx)
//! - License: GPL-3.0 license
//!
//! Modified by Gerrnperl
//!
//! ## Dependencies:
//!
//! - [Gerrnperl/k210-hal](https://github.com/Gerrnperl/k210-hal)
//! - (forked from [wyfcyx/k210-hal](https://github.com/wyfcyx/k210-hal))
//! - (forked from [riscv-rust/k210-hal](https://github.com/riscv-rust/k210-hal))
//! - [wyfcyx/k210-pac](https://github.com/wyfcyx/k210-pac)
//! - (forked from [riscv-rust/k210-pac](https://github.com/riscv-rust/k210-pac))
//! - [Gerrnperl/k210-soc](https://github.com/Gerrnperl/k210-soc)
//! - (forked from [wyfcyx/k210-soc](https://github.com/wyfcyx/k210-soc))
//!
//! ### License of the dependencies:
//! ```text
//! Copyright 2019 RISC-V team
//!
//! Permission to use, copy, modify, and/or distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.
//!
//! THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
//! ```
#![allow(non_snake_case)]
#![allow(non_camel_case_types)]
#![allow(unused)]
#[cfg(feature = "k210")]
pub const MMIO: &[(usize, usize)] = &[
// we don't need clint in S priv when running
// we only need claim/complete for target0 after initializing
(0x0C00_0000, 0x3000), /* PLIC */
(0x0C20_0000, 0x1000), /* PLIC */
(0x3800_0000, 0x1000), /* UARTHS */
(0x3800_1000, 0x1000), /* GPIOHS */
(0x5020_0000, 0x1000), /* GPIO */
(0x5024_0000, 0x1000), /* SPI_SLAVE */
(0x502B_0000, 0x1000), /* FPIOA */
(0x502D_0000, 0x1000), /* TIMER0 */
(0x502E_0000, 0x1000), /* TIMER1 */
(0x502F_0000, 0x1000), /* TIMER2 */
(0x5044_0000, 0x1000), /* SYSCTL */
(0x5200_0000, 0x1000), /* SPI0 */
(0x5300_0000, 0x1000), /* SPI1 */
(0x5400_0000, 0x1000), /* SPI2 */
];
use super::BlockDevice;
use crate::{printkln, utils::safety::SyncRefCell};
use core::convert::TryInto;
use k210_hal::prelude::*;
use k210_pac::{Peripherals, SPI0};
use k210_soc::{
fpioa::{self, io},
//dmac::{dma_channel, DMAC, DMACExt},
gpio,
gpiohs,
sleep::usleep,
spi::{SPI, SPIExt, SPIImpl, aitm, frame_format, tmod, work_mode},
sysctl,
};
use lazy_static::*;
pub struct SDCard<SPI> {
spi: SPI,
spi_cs: u32,
cs_gpionum: u8,
//dmac: &'a DMAC,
//channel: dma_channel,
}
/*
* Start Data tokens:
* Tokens (necessary because at nop/idle (and CS active) only 0xff is
* on the data/command line)
*/
/** Data token start byte, Start Single Block Read */
pub const SD_START_DATA_SINGLE_BLOCK_READ: u8 = 0xFE;
/** Data token start byte, Start Multiple Block Read */
pub const SD_START_DATA_MULTIPLE_BLOCK_READ: u8 = 0xFE;
/** Data token start byte, Start Single Block Write */
pub const SD_START_DATA_SINGLE_BLOCK_WRITE: u8 = 0xFE;
/** Data token start byte, Start Multiple Block Write */
pub const SD_START_DATA_MULTIPLE_BLOCK_WRITE: u8 = 0xFC;
pub const SEC_LEN: usize = 512;
/** SD commands */
#[repr(u8)]
#[derive(Debug, PartialEq, Eq, Copy, Clone)]
#[allow(unused)]
pub enum CMD {
/** Software reset */
CMD0 = 0,
/** Check voltage range (SDC V2) */
CMD8 = 8,
/** Read CSD register */
CMD9 = 9,
/** Read CID register */
CMD10 = 10,
/** Stop to read data */
CMD12 = 12,
/** Change R/W block size */
CMD16 = 16,
/** Read block */
CMD17 = 17,
/** Read multiple blocks */
CMD18 = 18,
/** Number of blocks to erase (SDC) */
ACMD23 = 23,
/** Write a block */
CMD24 = 24,
/** Write multiple blocks */
CMD25 = 25,
/** Initiate initialization process (SDC) */
ACMD41 = 41,
/** Leading command for ACMD* */
CMD55 = 55,
/** Read OCR */
CMD58 = 58,
/** Enable/disable CRC check */
CMD59 = 59,
}
#[allow(unused)]
#[derive(Debug, Copy, Clone)]
pub enum InitError {
CMDFailed(CMD, u8),
CardCapacityStatusNotSet([u8; 4]),
CannotGetCardInfo,
}
/**
* Card Specific Data: CSD Register
*/
#[derive(Debug, Copy, Clone)]
pub struct SDCardCSD {
pub CSDStruct: u8, /* CSD structure */
pub SysSpecVersion: u8, /* System specification version */
pub Reserved1: u8, /* Reserved */
pub TAAC: u8, /* Data read access-time 1 */
pub NSAC: u8, /* Data read access-time 2 in CLK cycles */
pub MaxBusClkFrec: u8, /* Max. bus clock frequency */
pub CardComdClasses: u16, /* Card command classes */
pub RdBlockLen: u8, /* Max. read data block length */
pub PartBlockRead: u8, /* Partial blocks for read allowed */
pub WrBlockMisalign: u8, /* Write block misalignment */
pub RdBlockMisalign: u8, /* Read block misalignment */
pub DSRImpl: u8, /* DSR implemented */
pub Reserved2: u8, /* Reserved */
pub DeviceSize: u32, /* Device Size */
//MaxRdCurrentVDDMin: u8, /* Max. read current @ VDD min */
//MaxRdCurrentVDDMax: u8, /* Max. read current @ VDD max */
//MaxWrCurrentVDDMin: u8, /* Max. write current @ VDD min */
//MaxWrCurrentVDDMax: u8, /* Max. write current @ VDD max */
//DeviceSizeMul: u8, /* Device size multiplier */
pub EraseGrSize: u8, /* Erase group size */
pub EraseGrMul: u8, /* Erase group size multiplier */
pub WrProtectGrSize: u8, /* Write protect group size */
pub WrProtectGrEnable: u8, /* Write protect group enable */
pub ManDeflECC: u8, /* Manufacturer default ECC */
pub WrSpeedFact: u8, /* Write speed factor */
pub MaxWrBlockLen: u8, /* Max. write data block length */
pub WriteBlockPaPartial: u8, /* Partial blocks for write allowed */
pub Reserved3: u8, /* Reserded */
pub ContentProtectAppli: u8, /* Content protection application */
pub FileFormatGroup: u8, /* File format group */
pub CopyFlag: u8, /* Copy flag (OTP) */
pub PermWrProtect: u8, /* Permanent write protection */
pub TempWrProtect: u8, /* Temporary write protection */
pub FileFormat: u8, /* File Format */
pub ECC: u8, /* ECC code */
pub CSD_CRC: u8, /* CSD CRC */
pub Reserved4: u8, /* always 1*/
}
/**
* Card Identification Data: CID Register
*/
#[derive(Debug, Copy, Clone)]
pub struct SDCardCID {
pub ManufacturerID: u8, /* ManufacturerID */
pub OEM_AppliID: u16, /* OEM/Application ID */
pub ProdName1: u32, /* Product Name part1 */
pub ProdName2: u8, /* Product Name part2*/
pub ProdRev: u8, /* Product Revision */
pub ProdSN: u32, /* Product Serial Number */
pub Reserved1: u8, /* Reserved1 */
pub ManufactDate: u16, /* Manufacturing Date */
pub CID_CRC: u8, /* CID CRC */
pub Reserved2: u8, /* always 1 */
}
/**
* Card information
*/
#[derive(Debug, Copy, Clone)]
pub struct SDCardInfo {
pub SD_csd: SDCardCSD,
pub SD_cid: SDCardCID,
pub CardCapacity: u64, /* Card Capacity */
pub CardBlockSize: u64, /* Card Block Size */
}
impl</*'a,*/ X: SPI> SDCard</*'a,*/ X> {
pub fn new(
spi: X,
spi_cs: u32,
cs_gpionum: u8, /*, dmac: &'a DMAC, channel: dma_channel*/
) -> Self {
Self {
spi,
spi_cs,
cs_gpionum,
/*
dmac,
channel,
*/
}
}
fn CS_HIGH(&self) {
gpiohs::set_pin(self.cs_gpionum, true);
}
fn CS_LOW(&self) {
gpiohs::set_pin(self.cs_gpionum, false);
}
fn HIGH_SPEED_ENABLE(&self) {
self.spi.set_clk_rate(10000000);
}
fn lowlevel_init(&self) {
gpiohs::set_direction(self.cs_gpionum, gpio::direction::OUTPUT);
self.spi.set_clk_rate(200000);
}
fn write_data(&self, data: &[u8]) {
self.spi.configure(
work_mode::MODE0,
frame_format::STANDARD,
8, /* data bits */
0, /* endian */
0, /*instruction length*/
0, /*address length*/
0, /*wait cycles*/
aitm::STANDARD,
tmod::TRANS,
);
self.spi.send_data(self.spi_cs, data);
}
/*
fn write_data_dma(&self, data: &[u32]) {
self.spi.configure(
work_mode::MODE0,
frame_format::STANDARD,
8, /* data bits */
0, /* endian */
0, /*instruction length*/
0, /*address length*/
0, /*wait cycles*/
aitm::STANDARD,
tmod::TRANS,
);
self.spi
.send_data_dma(self.dmac, self.channel, self.spi_cs, data);
}
*/
fn read_data(&self, data: &mut [u8]) {
self.spi.configure(
work_mode::MODE0,
frame_format::STANDARD,
8, /* data bits */
0, /* endian */
0, /*instruction length*/
0, /*address length*/
0, /*wait cycles*/
aitm::STANDARD,
tmod::RECV,
);
self.spi.recv_data(self.spi_cs, data);
}
/*
fn read_data_dma(&self, data: &mut [u32]) {
self.spi.configure(
work_mode::MODE0,
frame_format::STANDARD,
8, /* data bits */
0, /* endian */
0, /*instruction length*/
0, /*address length*/
0, /*wait cycles*/
aitm::STANDARD,
tmod::RECV,
);
self.spi
.recv_data_dma(self.dmac, self.channel, self.spi_cs, data);
}
*/
/*
* Send 5 bytes command to the SD card.
* @param cmd: The user expected command to send to SD card.
* @param arg: The command argument.
* @param crc: The CRC.
* @retval None
*/
fn send_cmd(&self, cmd: CMD, arg: u32, crc: u8) {
/* SD chip select low */
self.CS_LOW();
/* Send the Cmd bytes */
self.write_data(&[
/* Construct byte 1 */
((cmd as u8) | 0x40),
/* Construct byte 2 */
(arg >> 24) as u8,
/* Construct byte 3 */
((arg >> 16) & 0xff) as u8,
/* Construct byte 4 */
((arg >> 8) & 0xff) as u8,
/* Construct byte 5 */
(arg & 0xff) as u8,
/* Construct CRC: byte 6 */
crc,
]);
}
/* Send end-command sequence to SD card */
fn end_cmd(&self) {
/* SD chip select high */
self.CS_HIGH();
/* Send the cmd byte */
self.write_data(&[0xff]);
}
/*
* Returns the SD response.
* @param None
* @retval The SD Response:
* - 0xFF: Sequence failed
* - 0: Sequence succeed
*/
fn get_response(&self) -> u8 {
let result = &mut [0u8];
let mut timeout = 0x0FFF;
/* Check if response is got or a timeout is happen */
while timeout != 0 {
self.read_data(result);
/* Right response got */
if result[0] != 0xFF {
return result[0];
}
timeout -= 1;
}
/* After time out */
0xFF
}
/*
* Get SD card data response.
* @param None
* @retval The SD status: Read data response xxx0<status>1
* - status 010: Data accecpted
* - status 101: Data rejected due to a crc error
* - status 110: Data rejected due to a Write error.
* - status 111: Data rejected due to other error.
*/
fn get_dataresponse(&self) -> u8 {
let response = &mut [0u8];
/* Read resonse */
self.read_data(response);
/* Mask unused bits */
response[0] &= 0x1F;
if response[0] != 0x05 {
return 0xFF;
}
/* Wait null data */
self.read_data(response);
while response[0] == 0 {
self.read_data(response);
}
/* Return response */
0
}
/*
* Read the CSD card register
* Reading the contents of the CSD register in SPI mode is a simple
* read-block transaction.
* @param SD_csd: pointer on an SCD register structure
* @retval The SD Response:
* - `Err()`: Sequence failed
* - `Ok(info)`: Sequence succeed
*/
fn get_csdregister(&self) -> Result<SDCardCSD, ()> {
let mut csd_tab = [0u8; 18];
/* Send CMD9 (CSD register) */
self.send_cmd(CMD::CMD9, 0, 0);
/* Wait for response in the R1 format (0x00 is no errors) */
if self.get_response() != 0x00 {
self.end_cmd();
return Err(());
}
if self.get_response() != SD_START_DATA_SINGLE_BLOCK_READ {
self.end_cmd();
return Err(());
}
/* Store CSD register value on csd_tab */
/* Get CRC bytes (not really needed by us, but required by SD) */
self.read_data(&mut csd_tab);
self.end_cmd();
/* see also: https://cdn-shop.adafruit.com/datasheets/TS16GUSDHC6.pdf */
Ok(SDCardCSD {
/* Byte 0 */
CSDStruct: (csd_tab[0] & 0xC0) >> 6,
SysSpecVersion: (csd_tab[0] & 0x3C) >> 2,
Reserved1: csd_tab[0] & 0x03,
/* Byte 1 */
TAAC: csd_tab[1],
/* Byte 2 */
NSAC: csd_tab[2],
/* Byte 3 */
MaxBusClkFrec: csd_tab[3],
/* Byte 4, 5 */
CardComdClasses: (u16::from(csd_tab[4]) << 4) | ((u16::from(csd_tab[5]) & 0xF0) >> 4),
/* Byte 5 */
RdBlockLen: csd_tab[5] & 0x0F,
/* Byte 6 */
PartBlockRead: (csd_tab[6] & 0x80) >> 7,
WrBlockMisalign: (csd_tab[6] & 0x40) >> 6,
RdBlockMisalign: (csd_tab[6] & 0x20) >> 5,
DSRImpl: (csd_tab[6] & 0x10) >> 4,
Reserved2: 0,
// DeviceSize: (csd_tab[6] & 0x03) << 10,
/* Byte 7, 8, 9 */
DeviceSize: ((u32::from(csd_tab[7]) & 0x3F) << 16)
| (u32::from(csd_tab[8]) << 8)
| u32::from(csd_tab[9]),
/* Byte 10 */
EraseGrSize: (csd_tab[10] & 0x40) >> 6,
/* Byte 10, 11 */
EraseGrMul: ((csd_tab[10] & 0x3F) << 1) | ((csd_tab[11] & 0x80) >> 7),
/* Byte 11 */
WrProtectGrSize: (csd_tab[11] & 0x7F),
/* Byte 12 */
WrProtectGrEnable: (csd_tab[12] & 0x80) >> 7,
ManDeflECC: (csd_tab[12] & 0x60) >> 5,
WrSpeedFact: (csd_tab[12] & 0x1C) >> 2,
/* Byte 12,13 */
MaxWrBlockLen: ((csd_tab[12] & 0x03) << 2) | ((csd_tab[13] & 0xC0) >> 6),
/* Byte 13 */
WriteBlockPaPartial: (csd_tab[13] & 0x20) >> 5,
Reserved3: 0,
ContentProtectAppli: (csd_tab[13] & 0x01),
/* Byte 14 */
FileFormatGroup: (csd_tab[14] & 0x80) >> 7,
CopyFlag: (csd_tab[14] & 0x40) >> 6,
PermWrProtect: (csd_tab[14] & 0x20) >> 5,
TempWrProtect: (csd_tab[14] & 0x10) >> 4,
FileFormat: (csd_tab[14] & 0x0C) >> 2,
ECC: (csd_tab[14] & 0x03),
/* Byte 15 */
CSD_CRC: (csd_tab[15] & 0xFE) >> 1,
Reserved4: 1,
/* Return the reponse */
})
}
/*
* Read the CID card register.
* Reading the contents of the CID register in SPI mode is a simple
* read-block transaction.
* @param SD_cid: pointer on an CID register structure
* @retval The SD Response:
* - `Err()`: Sequence failed
* - `Ok(info)`: Sequence succeed
*/
fn get_cidregister(&self) -> Result<SDCardCID, ()> {
let mut cid_tab = [0u8; 18];
/* Send CMD10 (CID register) */
self.send_cmd(CMD::CMD10, 0, 0);
/* Wait for response in the R1 format (0x00 is no errors) */
if self.get_response() != 0x00 {
self.end_cmd();
return Err(());
}
if self.get_response() != SD_START_DATA_SINGLE_BLOCK_READ {
self.end_cmd();
return Err(());
}
/* Store CID register value on cid_tab */
/* Get CRC bytes (not really needed by us, but required by SD) */
self.read_data(&mut cid_tab);
self.end_cmd();
Ok(SDCardCID {
/* Byte 0 */
ManufacturerID: cid_tab[0],
/* Byte 1, 2 */
OEM_AppliID: (u16::from(cid_tab[1]) << 8) | u16::from(cid_tab[2]),
/* Byte 3, 4, 5, 6 */
ProdName1: (u32::from(cid_tab[3]) << 24)
| (u32::from(cid_tab[4]) << 16)
| (u32::from(cid_tab[5]) << 8)
| u32::from(cid_tab[6]),
/* Byte 7 */
ProdName2: cid_tab[7],
/* Byte 8 */
ProdRev: cid_tab[8],
/* Byte 9, 10, 11, 12 */
ProdSN: (u32::from(cid_tab[9]) << 24)
| (u32::from(cid_tab[10]) << 16)
| (u32::from(cid_tab[11]) << 8)
| u32::from(cid_tab[12]),
/* Byte 13, 14 */
Reserved1: (cid_tab[13] & 0xF0) >> 4,
ManufactDate: ((u16::from(cid_tab[13]) & 0x0F) << 8) | u16::from(cid_tab[14]),
/* Byte 15 */
CID_CRC: (cid_tab[15] & 0xFE) >> 1,
Reserved2: 1,
})
}
/*
* Returns information about specific card.
* @param cardinfo: pointer to a SD_CardInfo structure that contains all SD
* card information.
* @retval The SD Response:
* - `Err(())`: Sequence failed
* - `Ok(info)`: Sequence succeed
*/
fn get_cardinfo(&self) -> Result<SDCardInfo, ()> {
let mut info = SDCardInfo {
SD_csd: self.get_csdregister()?,
SD_cid: self.get_cidregister()?,
CardCapacity: 0,
CardBlockSize: 0,
};
info.CardBlockSize = 1 << u64::from(info.SD_csd.RdBlockLen);
info.CardCapacity = (u64::from(info.SD_csd.DeviceSize) + 1) * 1024 * info.CardBlockSize;
Ok(info)
}
/*
* Initializes the SD/SD communication in SPI mode.
* @param None
* @retval The SD Response info if succeeeded, otherwise Err
*/
pub fn init(&self) -> Result<SDCardInfo, InitError> {
/* Initialize SD_SPI */
self.lowlevel_init();
/* SD chip select high */
self.CS_HIGH();
/* NOTE: this reset doesn't always seem to work if the SD access was broken off in the
* middle of an operation: CMDFailed(CMD0, 127). */
/* Send dummy byte 0xFF, 10 times with CS high */
/* Rise CS and MOSI for 80 clocks cycles */
/* Send dummy byte 0xFF */
self.write_data(&[0xff; 10]);
/*------------Put SD in SPI mode--------------*/
/* SD initialized and set to SPI mode properly */
/* Send software reset */
self.send_cmd(CMD::CMD0, 0, 0x95);
let result = self.get_response();
self.end_cmd();
if result != 0x01 {
return Err(InitError::CMDFailed(CMD::CMD0, result));
}
/* Check voltage range */
self.send_cmd(CMD::CMD8, 0x01AA, 0x87);
/* 0x01 or 0x05 */
let result = self.get_response();
let mut frame = [0u8; 4];
self.read_data(&mut frame);
self.end_cmd();
if result != 0x01 {
return Err(InitError::CMDFailed(CMD::CMD8, result));
}
let mut index = 255;
while index != 0 {
/* <ACMD> */
self.send_cmd(CMD::CMD55, 0, 0);
let result = self.get_response();
self.end_cmd();
if result != 0x01 {
return Err(InitError::CMDFailed(CMD::CMD55, result));
}
/* Initiate SDC initialization process */
self.send_cmd(CMD::ACMD41, 0x40000000, 0);
let result = self.get_response();
self.end_cmd();
if result == 0x00 {
break;
}
index -= 1;
}
if index == 0 {
return Err(InitError::CMDFailed(CMD::ACMD41, result));
}
index = 255;
let mut frame = [0u8; 4];
while index != 0 {
/* Read OCR */
self.send_cmd(CMD::CMD58, 0, 1);
let result = self.get_response();
self.read_data(&mut frame);
self.end_cmd();
if result == 0 {
break;
}
index -= 1;
}
if index == 0 {
return Err(InitError::CMDFailed(CMD::CMD58, result));
}
if (frame[0] & 0x40) == 0 {
return Err(InitError::CardCapacityStatusNotSet(frame));
}
self.HIGH_SPEED_ENABLE();
self.get_cardinfo()
.map_err(|_| InitError::CannotGetCardInfo)
}
/*
* Reads a block of data from the SD.
* @param data_buf: slice that receives the data read from the SD.
* @param sector: SD's internal address to read from.
* @retval The SD Response:
* - `Err(())`: Sequence failed
* - `Ok(())`: Sequence succeed
*/
pub fn read_sector(&self, data_buf: &mut [u8], sector: u32) -> Result<(), ()> {
assert!(data_buf.len() >= SEC_LEN && (data_buf.len() % SEC_LEN) == 0);
/* Send CMD17 to read one block, or CMD18 for multiple */
let flag = if data_buf.len() == SEC_LEN {
self.send_cmd(CMD::CMD17, sector, 0);
false
} else {
self.send_cmd(CMD::CMD18, sector, 0);
true
};
/* Check if the SD acknowledged the read block command: R1 response (0x00: no errors) */
if self.get_response() != 0x00 {
self.end_cmd();
return Err(());
}
let mut error = false;
//let mut dma_chunk = [0u32; SEC_LEN];
let mut tmp_chunk = [0u8; SEC_LEN];
for chunk in data_buf.chunks_mut(SEC_LEN) {
if self.get_response() != SD_START_DATA_SINGLE_BLOCK_READ {
error = true;
break;
}
/* Read the SD block data : read NumByteToRead data */
//self.read_data_dma(&mut dma_chunk);
self.read_data(&mut tmp_chunk);
/* Place the data received as u32 units from DMA into the u8 target buffer */
for (a, b) in chunk.iter_mut().zip(/*dma_chunk*/ tmp_chunk.iter()) {
//*a = (b & 0xff) as u8;
*a = *b;
}
/* Get CRC bytes (not really needed by us, but required by SD) */
let mut frame = [0u8; 2];
self.read_data(&mut frame);
}
self.end_cmd();
if flag {
self.send_cmd(CMD::CMD12, 0, 0);
self.get_response();
self.end_cmd();
self.end_cmd();
}
/* It is an error if not everything requested was read */
if error { Err(()) } else { Ok(()) }
}
/*
* Writes a block to the SD
* @param data_buf: slice containing the data to be written to the SD.
* @param sector: address to write on.
* @retval The SD Response:
* - `Err(())`: Sequence failed
* - `Ok(())`: Sequence succeed
*/
pub fn write_sector(&self, data_buf: &[u8], sector: u32) -> Result<(), ()> {
assert!(data_buf.len() >= SEC_LEN && (data_buf.len() % SEC_LEN) == 0);
let mut frame = [0xff, 0x00];
if data_buf.len() == SEC_LEN {
frame[1] = SD_START_DATA_SINGLE_BLOCK_WRITE;
self.send_cmd(CMD::CMD24, sector, 0);
} else {
frame[1] = SD_START_DATA_MULTIPLE_BLOCK_WRITE;
self.send_cmd(
CMD::ACMD23,
(data_buf.len() / SEC_LEN).try_into().unwrap(),
0,
);
self.get_response();
self.end_cmd();
self.send_cmd(CMD::CMD25, sector, 0);
}
/* Check if the SD acknowledged the write block command: R1 response (0x00: no errors) */
if self.get_response() != 0x00 {
self.end_cmd();
return Err(());
}
//let mut dma_chunk = [0u32; SEC_LEN];
let mut tmp_chunk = [0u8; SEC_LEN];
for chunk in data_buf.chunks(SEC_LEN) {
/* Send the data token to signify the start of the data */
self.write_data(&frame);
/* Write the block data to SD : write count data by block */
for (a, &b) in /*dma_chunk*/ tmp_chunk.iter_mut().zip(chunk.iter()) {
//*a = b.into();
*a = b;
}
//self.write_data_dma(&mut dma_chunk);
self.write_data(&tmp_chunk);
/* Put dummy CRC bytes */
self.write_data(&[0xff, 0xff]);
/* Read data response */
if self.get_dataresponse() != 0x00 {
self.end_cmd();
return Err(());
}
}
self.end_cmd();
self.end_cmd();
Ok(())
}
}
/** GPIOHS GPIO number to use for controlling the SD card CS pin */
const SD_CS_GPIONUM: u8 = 7;
/** CS value passed to SPI controller, this is a dummy value as SPI0_CS3 is not mapping to anything
* in the FPIOA */
const SD_CS: u32 = 3;
/** Connect pins to internal functions */
fn io_init() {
fpioa::set_function(io::SPI0_SCLK, fpioa::function::SPI0_SCLK);
fpioa::set_function(io::SPI0_MOSI, fpioa::function::SPI0_D0);
fpioa::set_function(io::SPI0_MISO, fpioa::function::SPI0_D1);
fpioa::set_function(io::SPI0_CS0, fpioa::function::gpiohs(SD_CS_GPIONUM));
fpioa::set_io_pull(io::SPI0_CS0, fpioa::pull::DOWN); // GPIO output=pull down
}
lazy_static! {
static ref PERIPHERALS: SyncRefCell<Peripherals> =
unsafe { SyncRefCell::new(Peripherals::take().unwrap()) };
}
fn init_sdcard() -> SDCard<SPIImpl<SPI0>> {
// wait previous output
usleep(100000);
let peripherals = unsafe { Peripherals::steal() };
sysctl::pll_set_freq(sysctl::pll::PLL0, 800_000_000).unwrap();
sysctl::pll_set_freq(sysctl::pll::PLL1, 300_000_000).unwrap();
sysctl::pll_set_freq(sysctl::pll::PLL2, 45_158_400).unwrap();
let clocks = k210_hal::clock::Clocks::new();
peripherals.UARTHS.configure(115_200.bps(), &clocks);
io_init();
let spi = peripherals.SPI0.constrain();
let sd = SDCard::new(spi, SD_CS, SD_CS_GPIONUM);
let info = sd.init().unwrap();
let num_sectors = info.CardCapacity / 512;
assert!(num_sectors > 0);
printkln!("init sdcard!");
sd
}
pub struct SDCardWrapper(SyncRefCell<SDCard<SPIImpl<SPI0>>>);
impl SDCardWrapper {
pub fn new() -> Self {
unsafe { Self(SyncRefCell::new(init_sdcard())) }
}
}
impl BlockDevice for SDCardWrapper {
fn read_block(&self, block_id: usize, buf: &mut [u8]) {
self.0
.inner_borrow()
.read_sector(buf, block_id as u32)
.unwrap();
}
fn write_block(&self, block_id: usize, buf: &[u8]) {
self.0
.inner_borrow()
.write_sector(buf, block_id as u32)
.unwrap();
}
}